<!-------------- General settings
--------------->
<applet code="Terminator.class" width=300 height=100>
<param name=Author value="Author: Vladimir N. Korotkov;
www.geocities.com/SiliconValley/Byte/3392">
<param name=sleep value=0>
<param name=longSleep value=1000>
<param name=stepN value=30>
<param name=backColor value=FF1493>
<!------------ Default parameters for all text
strings -------->
<param name=fontNameD value="Helvetica">
<param name=fontStyleD value=1>
<param name=fontSizeD value=32>
<param name=colorD value=b0c4de>
<param name=groundD value=5>
<param name=urlD
value="http://www.geocities.com/SiliconValley/Byte/3392/">
<!-------------- Optional settings for text
strings ----------->
<param name=text0 value="Terminator">
<param name=fontSize0 value=55>
<param name=text1 value="Try|different settings !">
<param name=color1 value=6a5acd>
</applet>
General settings |
|
| width, height | width and height of the banner |
| Author | compulsory parameter |
| sleep | time of delay in msec between frames |
| longSleep | delay at the moments of the maximum readability |
| stepN | number of frames per text string |
| backColor | color* of the background; if the value is negtive, then image background.jpg is used |
| amplitude | amplitude of the metal wave, default value is 0.2 |
Default parameters for all text strings |
Default value is used for any string if there is no corresponding optional parameter for this string. |
| fontNameD | font name ** |
| fontStyleD | font style: plain[0], bold[1], italic[2], bold+italic[3] |
| fontSizeD | font size |
| colorD | metal color* |
| groundD | additional distance below the line bottom to correct the line position |
| urlD | URL |
Optional settings for text strings |
The following parameters influence only on the current poster. Only parameters text0,
text1, ..., textN*** are required. You can change
value of any default parameter for any text string in obvious manner, using parameterN
instead of parameterD. In addition you can devide text into up to 3 lines with | , see text1 in HTML example; |
| textN | text of N'th string |
The easiest way to set up the applet on your site is to start with
general and default parameters from HTML example and to change only text0, text1, ...,
textN. Then customize fontsize0, fontsize1, ..., fontsizeN and so on ...
Vladimir Korotkov is the author of this applet.
You can use this applet freely to enhance your own private homepage. However, I placed a
small label in the rigth low angle, and the applet is connected with my home page, when it
is clicked with a mouse in this area.
* Hexadecimal RGB color code is used: FFFFFF is white, FF0000 is red, and
so on.
** The standard Java font names are Dialog, DialogInput, Courier,
Helvetica, TimesRoman, and ZapfDingbats.
*** 10 different strings are possible in freeware version, so text9 is
last.